header image
Home arrow Hoists/Specifications
Hoists/Specifications

Dejong Model AT75 750kg Capacity Rack and Pinion Material Hoist Specifications

General:

Lifting capacity

Platform Dimensions

Free standing mast

Max. mast height

Anchoring distance

Cable guide distance

Hoisting speed

Power requirement

Motor Capacity

Trailing cable

Weight basic machine

Weight mast section

Transport dimensions

Transport dimensions

750Kg

150x150cm 250x150cm (optional) 300x150cm (optional)

7.5 metres

75 metres

6 metres

4.5 metres

21 metres/minute

380V (3 phases) 50Hz

5.5kW

4x4mm2

Ca.900Kg

Ca.60Kg

280x166x173cm (lxwxh – without wheels)

365x199x189cm (lxwxh – with wheels)

 

Standard configuration:

1.5 metre mast fitted to the base frame

Mast-side platform fence of 1,8 metre height and one side fence 1.1 metre height

Standard lower-,upper- and emergency stops

Proximity switch to detect end of the rack for safe erection/dismantling

Mast-end safety section

If, for whatever reason the platform meets a obstruction while descending, a limit switch will cut-off the command immediately

Personnel safety by a 2 metre stop above ground level while lowering the platform

Phase reversible switch with motor rotation protection

Overspeed emergency brake

One cable guide directly above the cable drum

Cable drum

Service switch UP/STOP/DOWN/FLOOR-STOP attached to a 5 metre cable with scaffold coupling

 

RP Builders Hoist Model 500 Rated Capacity

Maximum Delivery Height = 75m

Hoist Speed = 0.426m

Power Req = 415 Volt 3 Phase 20 Amps

Complete with 8 Tower Sections

 

Dejong Type AT60P Material/Person Hoist 600kg/8 Person Specifications

Technical specifications:

Pay Load

Max. mast height, free standing

Max. mast height, anchored

Wall-tiles intervals

Cable guide intervals

Cabin dimensions  external

Cabin dimensions internal

Cabin dimensions door access

Ground cage dimensions external

Transport dimensions

Weight base unit

Drive

Motor

Current connection

Starting current

Nominal current

Lift control

 

Stabilizers

Power cable

Controlling current

Mastelement length

Mastelement weight

Module rack

600kg or 8 persons

7.5 metres

100metres

Every 9 metres

Every 4.5 metres

167x163x230cm

125x200cm

213x285x250cm

213x285x250cm

285x213x285cm

1900kg

Rack-and-pinion

5,5kW – 380 volt – 50Hz

35Amp

60Amp

12Amp

Semi-automatic in lift cabin by 2 push-buttons UP-DOWN and OVERRIDE (constant pressure), floor stop by guiders at mast

1 stamp under base-mast and 4 screw spindles

4x4mm2 (0-50mtr)-4x6mm(51-100mtr)

42 Volt

147cm

80kg

M=6

 

Welcome to Hoist Hire! Your time is valuable, so we won't waste it with fancy ramblings trying to convince you of how good we are. It's very simple:

When it comes to material hoists for you building projects, we are the best.

We specialise in providing sturdy, robust hoists and will bend over backwards to make sure you get the hoist on time when you need it, and within your budget.

Our friendly staff are here to serve you and make sure your building project runs smoother, and if you're like our other satisfied customers, you'll allow us to help you again and again and again... 

Please use the menu on the left to learn more about us, or our hoists, and thank you for your interest. Hoist Hire are the rack & pinion specialists!